| Specifications | |
|---|---|
| Classifications | EN ISO 14343-A : G 19 12 3 L Si SFA/AWS A5.9 : ER316LSi Werkstoffnummer : ~1.4430 |
| Approvals | ABS : ER316LSi CE : EN 13479 CWB : ER316LSi DB : 43.039.05 DNV-GL : VL 316 L (M13) DNV-GL : VL 316 L (M13) UKCA : EN 13479 VdTÜV : 04268 |
Approvals are based on factory location. Please contact ESAB for more information.
| Alloy Type | Austenitic (with approx. 8 % ferrite) 19% Cr – 12% Ni – 3% Mo – Low C – High Si |
| Shielding Gas | M12, M13 (EN ISO 14175) |
| Typical Tensile Properties | |||
|---|---|---|---|
| Condition | Yield Strength | Tensile Strength | Elongation |
| AWS | |||
| As Welded | 460 MPa ( 67 ksi ) | 630 MPa ( 91 ksi ) | 40 % |
| ISO Tested at 350°C. | |||
| As Welded | 340 MPa ( 49 ksi ) | 440 MPa ( 64 ksi ) | 26 % |
| ISO | |||
| As Welded | 400 MPa ( 58 ksi ) | 560 MPa ( 81 ksi ) | 37 % |
| Typical Charpy V-Notch Properties | ||
|---|---|---|
| Condition | Testing Temperature | Impact Value |
| AWS | ||
| As Welded | -196 °C ( -321 °F ) | 50 J ( 37 ft-lb ) |
| ISO | ||
| As Welded | 20 °C ( 68 °F ) | 120 J ( 89 ft-lb ) |
| As Welded | -60 °C ( -76 °F ) | 95 J ( 70 ft-lb ) |
| As Welded | -110 °C ( -166 °F ) | 70 J ( 52 ft-lb ) |
| As Welded | -196 °C ( -321 °F ) | 45 J ( 33 ft-lb ) |
| Typical Weld Metal Analysis % | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | S | P | Ni | Cr | Mo | Cu | FN WRC-92 |
| 0.02 | 1.8 | 0.8 | 0.015 | 0.015 | 12 | 18.5 | 2.7 | 0.1 | 6 |
| – | – | – | – | – | – | – | – | – | 6 |
| Typical Wire Composition % | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | S | P | Ni | Cr | Mo | Cu | N | FN WRC-92 |
| 0.012 | 1.7 | 0.76 | 0.013 | 0.015 | 11.8 | 18.4 | 2.6 | 0.1 | 0.052 | 8 |
| Deposition Data | ||||
|---|---|---|---|---|
| Diameter | Current | Voltage | Wire Feed Speed | Deposition Rate |
| 0.8 mm ( 0.030 in. ) |
55-160 A | 12-24 V | 4.0-17.0 m/min ( 157-669 in./min ) |
1.0-4.1 kg/h ( 2.2-9.0 lbs/h ) |
| 0.9 mm ( 0.035 in. ) |
65-220 A | 15-28 V | 3.5-18.0 m/min ( 138-709 in./min ) |
1.1-5.4 kg/h ( 2.4-11. lbs/h ) |
| 1.0 mm ( 0.040 in. ) |
80-240 A | 15-28 V | 4.0-16.0 m/min ( 157-630 in./min ) |
1.5-6.0 kg/h ( 3.3-13. lbs/h ) |
| 1.2 mm ( 0.047 in. ) |
100-300 A | 15-29 V | 3.0-14.0 m/min ( 118-551 in./min ) |
1.6-7.5 kg/h ( 3.5-16. lbs/h ) |
| 1.6 mm ( 1/16 in. ) |
230-375 A | 23-31 V | 5.5-9.0 m/min ( 217-354 in./min ) |
5.2-8.6 kg/h ( 11.5-19. lbs/h ) |
| Recommended Welding Parameters | |
|---|---|
| Wire Diameter | |
| 0.6 mm ( 0.025 in. ) | |
| 1.14 mm ( 0.045 in. ) | |
Reviews
There are no reviews yet.