Specifications
| Specifications | |
|---|---|
| Classifications | SFA/AWS A5.14 : ERNiCrMo-3 EN ISO 18274 : S Ni 6625 |
| Approvals | DNV-GL : 1.2 mm VdTÜV : 12413 |
Approvals are based on factory location. Please contact ESAB for more information.
| Alloy Type | Alloyed nickel (Ni + 22 % Cr + 9 % Mo – 3.5 % Nb) |
| Shielding Gas | I1, I3, M12 (EN ISO 14175) |
| Typical Tensile Properties | |||
|---|---|---|---|
| Condition | Yield Strength | Tensile Strength | Elongation |
| As Welded | 500 MPa ( 73 ksi ) | 780 MPa ( 113 ksi ) | 45 % |
| As welded+ | 380 MPa ( 55 ksi ) | 580 MPa ( 84 ksi ) | 48 % |
| Stress Relieved 15 hour(s) 550 °C ( 1022 °F ) |
490 MPa ( 71 ksi ) | 796 MPa ( 115 ksi ) | 40 % |
| SHT 0.5 hour(s) 1175 °C ( 2147 °F ) |
375 MPa ( 54 ksi ) | 765 MPa ( 111 ksi ) | 46 % |
| SHT+ 0.5 hour(s) 1175 °C ( 2147 °F ) |
270 MPa ( 39 ksi ) | 590 MPa ( 86 ksi ) | 46 % |
| Typical Charpy V-Notch Properties | |
|---|---|
| Testing Temperature | Impact Value |
| 20 °C ( 68 °F ) | 130 J ( 96 ft-lb ) |
| 20 °C ( 68 °F ) | 140 J ( 103 ft-lb ) |
| 20 °C ( 68 °F ) | 185 J ( 136 ft-lb ) |
| -105 °C ( -157 °F ) | 120 J ( 88.5 ft-lb ) |
| -105 °C ( -157 °F ) | 170 J ( 125 ft-lb ) |
| -196 °C ( -321 °F ) | 110 J ( 81 ft-lb ) |
| -196 °C ( -321 °F ) | 120 J ( 88.5 ft-lb ) |
| -196 °C ( -321 °F ) | 150 J ( 111 ft-lb ) |
| Typical Weld Metal Analysis % | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | S | P | Ni | Cr | Mo | Al | Cu | Ti | Fe | Nb+Ta |
| 0.011 | 0.05 | 0.05 | 0.001 | 0.004 | 65 | 21.8 | 8.7 | 0.09 | 0.01 | 0.19 | 0.37 | 3.56 |
| Typical Wire Composition % | |||||||
|---|---|---|---|---|---|---|---|
| C | Mn | Si | Ni | Cr | Mo | Fe | Nb+Ta |
| 0.02 | 0.04 | 0.06 | Bal | 22.7 | 8.6 | 0.3 | 3.5 |
| Deposition Data | ||||
|---|---|---|---|---|
| Diameter | Current | Voltage | Wire Feed Speed | Deposition Rate |
| 0.9 mm ( 0.035 in. ) |
80-190 A | 20-27 V | 5.0-16.0 m/min ( 197-630 in./min ) |
2.0-4.2 kg/h ( 4.4-9.3 lbs/h ) |
| 1.0 mm ( 0.040 in. ) |
100-200 A | 21-27 V | 6.0-13.0 m/min ( 236-512 in./min ) |
2.5-5.5 kg/h ( 5.5-12. lbs/h ) |
| 1.14 mm ( 0.045 in. ) |
130-240 A | 22-28 V | 6.0-12.0 m/min ( 236-472 in./min ) |
3.0-5.7 kg/h ( 6.6-12. lbs/h ) |
| 1.2 mm ( 0.047 in. ) |
160-280 A | 24-30 V | 6.0-10.0 m/min ( 236-394 in./min ) |
3.6-6.0 kg/h ( 7.9-13. lbs/h ) |
| 1.6 mm ( 1/16 in. ) |
200-350 A | 25-32 V | 4.0-8.0 m/min ( 157-315 in./min ) |
4.3-8.6 kg/h ( 9.5-19. lbs/h ) |
Reviews
There are no reviews yet.